Not registered yet? Register
To begin proper management of an LNAPL site, one must first determine the problems or concerns that the LNAPL poses at the site. A complete site characterization and LCSM will help to identify these concerns. Once the concerns are identified, appropriate “LNAPL remedial objectives” are set to eliminate the LNAPL concerns at … Continue reading
The AR4 is designed to pump floating hydrocarbons, leachate, and condensate in total fluids applications. The AR4 is operated automatically, and needs no controller. Everything needed to operate the system is built into the pump. The design withstands the harshest and most corrosive environments such as landfills or mines.
The Geotech PRS is a product recovery system that incorporates a pneumatic control panel with a downwell stainless steel pneumatic bladder pump coupled with a unique floating skimmer attachment. The skimmer attachment consists of an oleophilic/hydrophobic buoy that allows free floating product to be skimmed down to a sheen.
The Geotech PRS is a product recovery system that incorporates a pneumatic control panel with a downwell stainless steel pneumatic bladder pump coupled with a unique floating skimmer attachment. The skimmer attachment consists of an oleophilic/hydrophobic buoy that allows free floating product to be skimmed down to a sheen.
The Geotech AC Sipper is a Single-Phase, 110-220V AC, powered remediation system, designed for recovery applications where electrical power is available. This uniquely flexible system can be configured for up to eight wells. The compact, easy-to-install features make this unit an industry favorite! The AC Sipper uses a unique downwell pump to recover hydrocarbons through a floating oleophilic/hydrophobic intake filter. Once the pump canister is filled via the vacuum cycle, the pump reverses, pressurizes the system and pumps the recovered fluid to the surface and into a storage vessel. The Geotech AC Sipper can effectively extract fluids from depths to 180 feet below ground surface and recover viscous hydrocarbons such as 90 weight oil when our heavy oil skimmer is utilized.
BioSolve products are water-based surfactant formulations engineered to aggressively “grab” hydrocarbon molecules and hold them in an aqueous solution, called an emulsion.
The AR4 is designed to pump floating hydrocarbons, leachate, and condensate in total fluids applications. The AR4 is operated automatically, and needs no controller. Everything needed to operate the system is built into the pump. The design withstands the harshest and most corrosive environments such as landfills or mines.
The Geotech Soil Vapor Extraction system is designed to remove hazardous vapors from the subsurface by drawing air through contaminated soil, and volatilizing adsorbed phase pollutants. Geotech SVE systems are ideal for well point or trench type vapor barriers.
The AR4 is designed to pump floating hydrocarbons, leachate, and condensate in total fluids applications. The AR4 is operated automatically, and needs no controller. Everything needed to operate the system is built into the pump. The design withstands the harshest and most corrosive environments such as landfills or mines.
The Geotech Soil Vapor Extraction system is designed to remove hazardous vapors from the subsurface by drawing air through contaminated soil, and volatilizing adsorbed phase pollutants. Geotech SVE systems are ideal for well point or trench type vapor barriers.
The Geotech Soil Vapor Extraction system is designed to remove hazardous vapors from the subsurface by drawing air through contaminated soil, and volatilizing adsorbed phase pollutants. Geotech SVE systems are ideal for well point or trench type vapor barriers.
The Geotech Soil Vapor Extraction system is designed to remove hazardous vapors from the subsurface by drawing air through contaminated soil, and volatilizing adsorbed phase pollutants. Geotech SVE systems are ideal for well point or trench type vapor barriers.
The AR4 is designed to pump floating hydrocarbons, leachate, and condensate in total fluids applications. The AR4 is operated automatically, and needs no controller. Everything needed to operate the system is built into the pump. The design withstands the harshest and most corrosive environments such as landfills or mines.
